SST 45 - 45SS

This is a favorite class of ours.  We have a great deal of experience and a long list of success. WPT has run more than 400 dyno runs doing testing and evaluation work.  We should not call it development because the engine is a spec class. But we know were those specs need to be to make the strongest engines. Just check our record. 

1997 PTT Series Champion……………………..Brad Schaub
1999 National Champion………………………..Brad Schaub
1999 National High Points Champion…………..Brad Schaub
1999 World Championship All four heats………Brad Schaub
1999 HOC Inductee……………………………...Brad Schaub
2001 North American Championship…………....Rodney Schuh
2003  National Champion………………………..Rodney Schuh
2003  World Champion…………………………..Jay Fox
2004  National Champion………………….…….Jay Fox
2004  World Champion…………………….…….Jay Fox
2004  National High Points Champion…………..Jay Fox
2004  PTT Series Champion…………………..…Jay Fox
2004 WFLS Series Champion…………………...Shaun Love
2004 HOC Inductee……………………………...Jay Fox
2005  National Champion…………………….…Bud Nollman
2005  World Champion……………………….…Jay Fox
2005  National High Points Champion……….…Jay Fox
2005  Series Champion……………………….…Jay Fox
2005 HOC Inductee……………………………..Jay Fox
We stopped counting but the list goes on
 
Bench Evaluation ………………………….……….$250
Disassemble, evaluate all measurements and document only.
Reassemble after cleaning parts if further work is not done by WPT……………………………………………..……$150
If /when we prepare your race engine, the above is not charged.
It is part of doing it right. We need to know what you need first.
Pic16
Race Prep SST 45…………………………………..$650
Plus parts and special machining required, such as boring or sleeving.
Prepare Quality, Legal Race Engine using techniques acquired from over 25 years of preparing race engines.  Each engine is prepared to the best of the ability of the parts provided. New parts will be recommended when required for your approval. It is our goal to make every engine, a winning engine. We by all our new parts from SeaWay Marine.
Pic17
Dynamometer Break-in Service……………………….$500
Highly recommended. Our test facility can do the break-in of your engine better and in more controlled conditions than can be done on a boat. This saves you time as your engine is delivered to you with knowledge that it runs correctly and is race ready.
Pic18
Dynamometer Service (per day charge)……………….…$500
Racers may come to our facility or ship engines to WPT for Dyno tuning and evaluation of many engines in a days time.    See which of your engines is better and tune the best performance out of each one.  Fuels, Jetting, Timing and even Spark Plugs, are things you can now verify with solid data, no longer just opinion.   SST 45 is very sensitive in carburetion, when doing dyno work for this engine, I recommend sending every carb set you have.